免费观看国产女人高潮视频,国产亚洲视频免费播放,成在线人AV无码高潮喷水,在线观看免费人成视频色9

Product Description

 Magnetostrictive displacement sensor:

Introduction:
The magnetostrictive displacement sensor, base on the magnetostrictive position sensing principle, contactless operation ensures product long service life, better adaptability to industrial environment; absolute output, restart don't need from zero; High accuracy,high stability, the best durability and repeatability. Variety of output signals which include the current, voltage, SSI, Modbus, Profibus etc., can meet any industrial applications such as petroleum, chemical industry, steel and iron, port, machinery, food and so on. It is the best
choice for high accuracy displacement control.

Features

1) high precision 0.05% FS

2) durable, hermetically sealed design

3) anti-interference ability, lower working current

4) non-contact measurement, no wearing

5) zero point adjustable scope to full range

6) support two places measurement at the same time

Application:

1) oil cylinder and air cylinder, hydraulic cylinder position detection

2) oil tank, medicine bottle reservoir etc level measurement

3)valve, gate open degree testing

4) mechanical equipment mobile location feedback

5)injection molding machine template orientation and monitoring

parameters

	SDMS series of analog output		SDMS series of digital output
power	DC24V
Measuring object	1~2 positions		1~3 positions
range	80mm~5000mm
output	Voltage 0-5VDC or 0-10VDC	MODBUS			SSI
	Current 0-20mA or 4-20mA
loaded	Min voltage output load＞5KΩ，Max current output load 600KΩ				Point to point
nonlinearity	＜±0.05%F.S（min ±50um）
repeatability	＜±0.002%F.S
resolution	Use 16BitD/A transform，0.0015%F.S		25um
hysteresis	＜0.02%F.S
Operating temp	-40~+85℃
temperature coefficient (T.C.)		＜0.007%F.S/℃

 

Wiring:

 

 

 

Analog output：

 

wiring			Pins description
Aviation plugs		Cable colors	Single magnet	Single magnet wit debugging serial port	Two position output
	Pin1	red	power（+）	power（+）	power（+）
	Pin2	white	Signal output（-）	Signal output（-）	Signal 1output（-）
	Pin3	blue	Signal output（+）	Signal output（+）	Signal 1 output（+）
	Pin4	green	NC	RS-485 signal B	Signal 2output（+）
	Pin5	brown	NC	RS-485 signal A	Signal 2output（-）
	Pin6	Bare wire	Shielding wire	Shielding wire	Shielding wire
	Pin7	black	power（-）	power（-）	power（-）

 

 

Digital output：

wiring						Pins description
Aviation plugs			Cable colors		MODBUS output			SSI output
	Pin1	red		power（+）			power（+）
	Pin2	white		NC
	Pin3	blue		NC
	Pin4	green		RS-485 signalB
	Pin5	brown		RS-485 signalA
	Pin6	Bare wire		Shielding wire			Shielding wire
	Pin7	black		power（-）			power（-）

Installation steps：

1) 1) Stuck sensor by sensor holder, then fixed the holder in the sensor with lock nut.
2) )Fixed Captive-sliding magnet on the holder through two  Retainer washer # 6 and two Screws M3 × 16, installation it on length rod；the  captive-sliding magnet and rod should concentric as far as possible, but slightly  eccentric will not affected sensor performance.
3) Tightly fixed retaining plate at the end of rod with two M3 x 8 screws and two M3 nuts.
4) At last, installation the sensor to predetermined position according to installation requirement.

Product Image